6 CH Radio Remote Control Falcon CCPM 3D Aerobatic Electric RC Helicopter RTF w/ Brushless Set & Li-po Battery
Item No: 5701-ArtechFalcon3DHeli 

Usually Ships 1 - 3 Business Days




Listing Price: $699.99

Our Price: 299.99
 

Add to Cart

 
This is the latest version 2 of the Falcon 3D helicopter equipped with the latest radio control set with LCD display, cable for simulator, new gyro, and a strengthened tail pipe. This helicopter is made of special material, and has the ability of anti-bearing and crash resistant which lowers the maintenance cost. Furthermore, this kit includes a flight simulator kit (USB cable + software), training video CD, and a crash training kit.

25-1/4" main rotor diameter, 23-3/4" overall length, 20 oz. flying weight. Falcon 3D comes completely assembled and ready to fly. Helicopter has plenty of power and head speed for sport flying and aerobatics. Includes a brushless motor, brushless controller, gyro, 1300 mAh Lipo battery, wood blades, aluminum tail boom, training landing gear, and 6-channel 72 mHz FM helicopter transmitter. Charge the 1300 mAh lipo battery with the included cell balancing Lithium charger, from a 12 volt DC battery. Gear driven tail has all conical gears for smooth, reliable operation. Transmitter has pitch range centering and pitch curve end point adjustment knobs, and an Idle-up switch for aerobatic and inverted flight modes. Also includes training gear with Ping Pong balls and a blade holder. Transport in its original box.

Feature:
  • 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
  • New 6 channel Transmitter with LCD display and PIT/PLT mode lock switch and adjustable knob
  • NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
  • Plenty of power and head speed for sport flying and aerobatics
  • High quality individual head lock gyro
  • Reliable gear system
  • Reliable gear system
  • Accurate tail pitch control system
  • Tail servo mount for accurate rudder control
  • Reinforced carbon fiber tail rod
  • High intensity stainless steel shaft
  • High quality carbon fiber main blades
  • 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
  • CCPM mode with adjustable pitch system and 3D conversion
  • Tail rotor driven by shaft transmission system provide stable flight and low noise
  • Mode lock switch to free lock the parameters of PIT & PLT
  • Main rotor driven by powerful Brushless Motor
  • NO TAIL Motor - Tail rotor driven by main motor with servo controlled rudder like gas helicopters
  • No need to worry about burning tail motors
  • Tail blade adopt flameout landing system
  • Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
  • Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
  • Perfect for people who wants to move up from 4ch helicopter
  • PCM receiving and transmitting system increases the operation stability
  • Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
  • Almost Unbreakable Rotor Head
  • Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
  • Newly Designed Rotor Head gives better control
  • Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
  • Extreme smooth control and stable flight
  • Precise controlling and hovering
  • Can fly in skyway, backward, and 3D aerobatic
  • Suitable for Outdoor/Backyard/Stadium
  • Using the Ultra tough Carbon Fiber materials, the Helicopter does have very strong structure
  • Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
  • All spare parts and accessories are available.
  • Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)
Specification:
  • Main rotor diameter: 630mm (25 inch)
  • Tail rotor diameter: 152mm (6 inch)
  • Length: 770mm (30 inch)
  • Height: 210mm (8.3 inch)
  • Flying Weight: 530g (Battery included)
  • Drive system: In-Runner Brushless Motor w/ Heat Sink
  • Servo: 4X 9g
  • Gyro: Headlock Gyro
  • ESC: 18A Brushless Speed Controller
  • Battery: 11.1V 1300mAh Li-Po
  • Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
  • Radio Control Range: 2500 feet (762m)
Packing Including
  • Helicopter (100% Assembled)
  • 6 Channel Multifunctional FM R/C Transmitter
  • Wall Battery Balance Charger
  • 11.1V 1300mAh Li-Polymer Rechargeable Battery
  • BONUS Helicopter Training Kit
  • BONUS Simulator Kit and Software (Practice flying helicopters and airplanes on your computer)
  • BONUS Training Video CD (RC Helicopter & Airplane Education)
  • BONUS Main Blade Set
  • English Manual
Copyright © E-ToysWorld, All rights reserved. All prices and specifications are subject to change without notice.
E-ToysWorld is not responsible for typographical errors.
All typographical errors are subject to correction.